2.4GHz wireless networking
IEEE 802.11b/g/n compatible
Supports up to WPA2-Personal Wi-Fi network
Bluetooth 4.2/BLE wireless technology
1.73 inches (4.4 cm) x 4.12 inches (10.5 cm) x 1.78 inches (4.5 cm)
0.9 pounds (0.4 kg)
InvisConnectTM patented technology with InvisDeco support
Dual 15Amps controllable receptacles
Single reset button for pairing and reset
Single status indicator
Standard outlet electrical box
Neutral wire required
Line voltage: 100-125V AC
Frequency: 60Hz, single phase
Operating temperature: 32º to 104º F (0º to 40º C)
Relative humidity: 10% to 90% noncondensing
Environment: Indoors only
ETL (Conforms To UL498B)
FCC, IC certifications
TCP for local network control
MQTT with SSL/TLS technology for remote access
Device provisioning and pairing setup
Dual receptacles control
Customize device configurations
Set up automation routines
Configure MQTT broker and client setup
Receive and control InvisDeco accessories
Device provisioning and pairing setup
Dual receptacles control
Customize device configurations
Configure MQTT broker and client setup
Receive and control InvisDeco accessories
Matter
Works with Apple Home
Works with Alexa
Works with Google Assistant
Any assistant platforms supporting MQTT configuration
2.4GHz wireless networking
IEEE 802.11b/g/n compatible
Supports up to WPA2-Personal Wi-Fi network
Bluetooth 4.2/BLE wireless technology
2.94 inches (7.5 cm) x 4.72 inches (12 cm) x 0.35 inches (8.8 cm)
0.45 pounds (0.2 kg)
InvisConnectTM patented technology with InvisOutlet
Controllable and dimmable 2700K nightlight
Dual touch pads for outlet control
Dual outlet status indicators
Single RGB status indicator
Active sensorsAIR: Temperature, humidity, air quality level (AQI), CO2, VOC, and pressure monitoring
Active sensorsMOTION: Motion and presence detection
Active sensorsLIGHT: Ambient light monitoring (LUX)
Active sensorsPRO: AIR, MOTION, and LIGHT active sensors.
Connects with InvisOutlet
Operating temperature: 32º to 104º F (0º to 40º C)
Relative humidity: 10% to 90% noncondensing
Environment: Indoors only
ETL60730
FCC, IC certifications
Actively monitors ambient room status
Reports current status on status indicator
Triggers automation routines based on sensor reports
Configurable status indicators with brightness adjustment ability
Configurable touch control pads
Nightlight brightness adjustment curveLIGHT
